manualshive.com logo in svg

Dell PowerConnect 3500 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3500 Series Скачать руководство пользователя страница 345

SNMP Commands

345

Syntax

•

snmp-server host 

{

ip4-address | ip6-address | hostname} community-string

 [

traps | informs]  [1 | 2

]  

[udp-port

 

port

] [

filter

 filtername

] [

timeout 

seconds

] [

retries

 retries

]

•

no snmp-server host 

{

ip4-address | ip6-address | hostname}

 [

traps | informs

]

•

ip4-address

 — The host IPv4 address (the targeted recipient).

•

ip6-address

 — The host IPv6 address (the targeted recipient). When the IPv6 address is a Link 

Local address (IPv6Z address), the outgoing interface name must be specified. Refer to the usage 
guidelines for the interface name syntax. 

•

hostname

 — Specifies the name of the host. (Range:1 - 158 characters)

•

community-string

 — Specifies a password-like community string sent with the notification 

operation. (Range: 1 - 20)

•

traps

 — Indicates that SNMP traps are sent to this host. If unspecified, SNMPv2 traps are sent to 

the host.

•

informs

 — Indicates that SNMP informs are sent to this host. Not applicable to SNMPv1.

•

1

 — Indicates that SNMPv1 traps will be used.

•

2

 — Indicates that SNMPv2 traps will be used. If 

•

port

 — Specifies the UDP port of the host to use. If unspecified, the default UDP port number is 

162. (Range: 1 - 65535)

•

filtername

 — Specifies a string that defines the filter for this host. If unspecified, nothing is 

filtered. (Range: 1 - 30 characters)

•

seconds

 — Specifies the number of seconds to wait for an acknowledgment before resending 

informs. If unspecified, the default timeout period is 15 seconds. 
(Range: 1 - 300)

•

retries

 — Specifies the maximum number of times to resend an inform request. If unspecified, the 

default maximum number of retries is 3. (Range: 0 - 255)

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode.

User Guidelines

•

When configuring an SNMPv1 or SNMPv2 notification recipient, a notification view for that recipient 
is automatically generated for all the MIB.

•

When configuring an SNMPv1 notification recipient, the 

Inform

 option cannot be selected.

book.book  Page 345  Thursday, December 18, 2008  7:40 PM

Содержание PowerConnect 3500 Series



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды