0-74 DST/Summertime
Option:
Function:
Select how to handle daylight saving time/summer
time. For manual setting of DST/summer time,
enter the start date and end date in
parameter 0-76 DST/Summertime Start
and
parameter 0-77 DST/Summertime End
.
[0]
*
Off
[2]
Manual
0-76 DST/Summertime Start
Range:
Function:
Size
related
*
[ 0 - 0 ] Sets the date and time when DST/
summer time starts. The date is
programmed in the format selected in
parameter 0-71 Date Format
.
0-77 DST/Summertime End
Range:
Function:
Size
related
*
[ 0 - 0 ] Sets the date and time when DST/
summer time ends. The date is
programmed in the format selected in
parameter 0-71 Date Format
.
0-79 Clock Fault
Option:
Function:
Enables or disables the clock warning when the
clock has not been set, or has been reset due to a
power-down and no back-up is installed. If VLT
®
Analog I/O Option MCB 109 is installed,
[1] Enabled
is default.
[0] Disabled
[1] Enabled
0-81 Working Days
Array [7]
Array with 7 elements [0]–[6] shown below the parameter
number in the display. Press [OK] and step between elements
with [
▲
] and [
▼
].
Option: Function:
Set for each weekday if it is a working day or a non-
working day. First element of the array is Monday. The
working days are used for timed actions.
[0] No
[1] Yes
0-82 Additional Working Days
Array [5]
Array with 5 elements [0]–[4] shown below the parameter
number in the display. Press [OK] and step between elements
with [
▲
] and [
▼
].
Range:
Function:
Size related
*
[ 0 - 0 ] Defines dates for additional working days
that would normally be non-working
days according to
parameter 0-81 Working
Days
.
0-83 Additional Non-Working Days
Array [15]
Array with 15 elements [0]–[14] shown below the parameter
number in the display. Press [OK] and step between elements
with [
▲
] and [
▼
].
Range:
Function:
Size related
*
[ 0 - 0 ] Defines dates for additional working days
that would normally be non-working
days according to
parameter 0-81 Working
Days
.
0-84 Time for Fieldbus
Range:
Function:
0
*
[0 - 4294967295 ]
Shows the time for fieldbus.
0-85 Summer Time Start for Fieldbus
Range:
Function:
0
*
[0 - 4294967295 ] Shows the summer time start for
fieldbus.
0-86 Summer Time End for Fieldbus
Range:
Function:
0
*
[0 - 4294967295 ] Shows the summer time end for fieldbus.
0-89 Date and Time Readout
Range:
Function:
0
*
[0 - 25 ] Shows the current date and time. The date and
time is updated continuously.
The clock does not begin counting until a setting
different from default has been made in
parameter 0-70 Date and Time
.
Parameter Descriptions
Programming Guide
MG33MP02
Danfoss A/S © 10/2018 All rights reserved.
41
3
3
Содержание VLT AutomationDrive FC 302
Страница 2: ......