We reserve the right to make changes without prior notice
25
After upload completion, the following screen appears:
Take out the USB pen drive and wait for the board rebooting.
3.7 Advanced history and log files
If log generation files were uploaded into the board, as described above, some operating variables of the unit
are logged whenever each programmed event occurs. The log can be read directly on the unit display as it is
controlled directly by the board BIOS.
3.7.1 Access to logs from the unit display
This branch can be accessed from any screen by pressing the “Alarm” and “Enter” buttons simultaneously for
a few seconds, which causes the following screen to appear.
SYSTEM INFORMATION
> LOG DATA
OTHER INFORMATION
-
Press the arrow buttons to move the cursor to the “LOG DATA” item and press Enter to confirm.
If the file for log recording was not uploaded in the controller memory, this screen appears:
NO LOG DATA
PRESS
[MENU] OR [ESC]
On the other hand, if the history management file was uploaded correctly, the following screen appears.
1 DISPLAY LOG DATA
Which memory?
EXPANSION MEMORY
The first level shows the memory where the logs are stored: the records in the history log can be read.
Select the memory you want to read using the arrow buttons and then enter the second level by pressing the
"Enter" button to confirm.