Daikin UATYQ20-115ABAY1, Руководство по обслуживанию, Страница: 100 / 104

We reserve the right to make changes without prior notice
100
9 QUICK GUIDE
Below is a quick guide of the main controller functions.
Keyboard-controlled unit switch-on and switch-off
In the Main screen  Prg  select the “Unit On/Off” menu  Enter  Enter to switch the unit on or off.
Editing the summer temperature setpoint
In the Main screen  Prg  select the “Setpoint” menu  Enter  Screen S0: Enter  Edit the summer
setpoint  Enter to confirm.
Editing the winter temperature setpoint
In the Main screen  Prg  select the “Setpoint” menu  Enter   once  Screen S1: Enter  Edit the
winter setpoint  Enter to confirm.
Editing the summer humidity setpoint
In the Main screen  Prg  select the “Setpoint” menu  Enter   twice  Screen S2: Enter  Edit the
humidity setpoint  Enter to confirm.
Editing the winter humidity setpoint
In the Main screen  Prg  select the “Setpoint” menu  Enter   three times  Screen S3: Enter 
Edit the humidity setpoint  Enter to confirm.
Editing the air flow rate setpoint in the delivery line
Unit featuring air flow rate control in the delivery line
In the Main screen
 Prg  select the “Setpoint” menu  Enter   five times  Screen S5: Enter  Edit
the air flow rate in the delivery line  Enter to confirm.
Editing the air flow rate setpoint in the return line
Unit featuring air flow rate control in the return line
In the Main screen

Prg

select the “Setpoint” menu

Enter
 
seven times

Screen S6: Enter

Edit the air flow rate in the return line  Enter to confirm.
Editing the setpoint and differential for electric heater activation
Units featuring enabled electric heaters
In the Main screen
 Prg  select the “User” menu  Enter  Key in the User password   until screen
Pe appears

Enter

Edit the setpoint or the differential for electric heater activation

Enter to confirm.
Editing the CO
2
concentration setpoint (air quality)
Units featuring dampers and enabled CO
2
probe
In the Main screen  Prg  select the “User” menu  Enter  Key in the User password   until screen
Pg appears  Enter  Edit the CO
2
concentration setpoint  Enter to confirm.
Washing function (override free cooling upon unit start-up)
Units featuring free cooling
In the Main screen
 Prg  select the “User” menu  Enter  Key in the User password   until screen
Pm appears  Enter  Enable/disable free cooling overriding upon unit start-up  Enter to confirm.
 to move to the Po screen  Enter  Edit the washing cycle time  Enter  Enable/disable the temperature
and humidity control during the washing cycle

Enter to confirm.
Viewing active alarms
Press the Alarm button (red bell) when it is lit.
 to scroll the active alarms.
Enable/disable remote ON/OFF, ON/OFF from supervisory control or after power blackout
In the Main screen  Prg  select the “User” menu  Enter  Key in the User password   until screen
Pp appears  Enter  Enable/disable the desired functions  Enter to confirm.
Selection of summer/winter mode switching procedure
In the Main screen  Prg  select the “Manufacturer” menu  Enter  Key in the Manufacturer password
 Select “Configuration”  Enter   until screen C6 appears  Enter  Select the summer/winter mode
switching procedure  Enter to confirm.