DGS-3312SR Layer 3 Gigabit Switch
263
Command Parameters
show ospf all
create ospf virtual_link
<area_id> <neighbor_id> {hello_interval <sec 1-65535> |
dead_interval <sec 1-65535> | authentication [none | simple
<password 8> | md5 <key_id 1-255>]}
config ospf virtual_link
<area_id> <neighbor_id> {hello_interval <sec 1-65535> |
dead_interval <sec 1-65535> | authentication [none | simple
<password 8> | md5 <key_id 1-255>]}
delete ospf virtual_link
<area_id> <neighbor_id>
show ospf virtual_link
<area_id> <neighbor_id>
Each command is listed, in detail, in the following sections.
config ospf router_id
Purpose
Used to configure the OSPF router ID.
Syntax
config ospf router_id <ipaddr>
Description
This command is used to configure the OSPF router ID.
Parameters
<ipaddr>
−
The IP address of the OSPF router.
Restrictions Only
administrator-level users can issue this command.
Usage Example
To configure the OSPF router ID:
DGS-3312SR:4#config ospf router_id 10.48.74.122
Command: config ospf router_id 10.48.74.122
Success.
DGS-3312SR:4#
enable ospf
Purpose
Used to enable OSPF on the switch.
Syntax
enable ospf
Description
This command, in combination with the
disable ospf
command below, is used to enable and disable OSPF on the
switch.
Parameters None.
Restrictions Only
administrator-level users can issue this command.
Usage Example
To enable OSPF on the switch:
Содержание DGS-3312SR
Страница 2: ......
Страница 4: ......
Страница 57: ...DGS 3312SR Layer 3 Gigabit Switch 51 DGS 3312SR 4 disable rmon Command disable rmon Success DGS 3312SR 4...
Страница 305: ...DGS 3312SR Layer 3 Gigabit Switch 3 www dlink co uk...