D-Link DGS-3312SR, Справочное руководство по интерфейсу командной строки

Страница: 204 / 305

DGS-3312SR Layer 3 Gigabit Switch
198
Usage Example
To globally enable stacking:
DGS-3312SR:4#config stacking mode enable
Command: config stacking mode enable
The new stacking mode configuration must be saved and the system
restarted to put the new settings into effect.
If you do not save the changes now,they will be lost.
Do you want to save the new system configuration to NV-RAM and restart
now?(y/n)
It is necessary to save the stacking mode settings and restart the system. If you want to save and restart press Y. It will take a
few minutes for the system to reboot.
It is also possible to use any of the built-in combination ports for stacking. Follow the example below to enable stacking for a
built-in port.
To configure built-n port number 4 to function as a stacking port:
DGS-3312SR:4#config stacking mode enable ports 4
Command: config stacking mode enable ports 4
The new stacking mode configuration must be saved and the system
restarted to put the new settings into effect.
If you do not save the changes now, they will be lost.
Do you want to save the new system configuration to NV-RAM and
restart now?(y/n)
Success.
DGS-3312SR:4#
It is necessary to save the stacking mode settings and restart the system. If you want to save and restart press Y. It will take a
few minutes for the system to reboot.
show stacking
Purpose Used to display the current stacking mode.
Syntax
show stacking {mode}
Description This command will display the current stacking configurations,
and mode, if specified.
Parameters
mode
−
Displays the current stacking mode.
Restrictions None.
Usage Example: