DGS-3312SR Layer 3 Gigabit Switch
45
show snmp host
Purpose
Used to display the recipient of SNMP traps generated by the
switch’s SNMP agent.
Syntax
show snmp host {<ipaddr>}
Description
The
show snmp host
command is used to display the IP
addresses and configuration information of remote SNMP
managers that are designated as recipients of SNMP traps that
are generated by the switch’s SNMP agent.
Parameters
<ipaddr>
−
The IP address of a remote SNMP manager that will
receive SNMP traps generated by the switch’s SNMP agent.
Restrictions None.
Example usage:
To display the currently configured SNMP hosts on the switch:
DGS-3312SR:4#show snmp host
Command: show snmp host
SNMP Host Table
Host IP Address SNMP Version Community Name/SNMPv3 User Name
--------------- --------------------- ------------------------------
10.48.76.23 V2c private
10.48.74.100 V3 authpriv public
Total Entries: 2
DGS-3312SR:4#
create trusted_host
Purpose
Used to create the trusted host.
Syntax
create trusted_host <ipaddr>
Description
The
create trusted_host
command creates the trusted host.
The switch allows you to specify up to four IP addresses that are
allowed to manage the switch via in-band SNMP or TELNET
based management software. These IP addresses must be
members of the Management VLAN. If no IP addresses are
specified, then there is nothing to prevent any IP address from
accessing the switch, provided the user knows the Username and
Password.
Parameters
<ipaddr>
−
The IP address of the trusted host.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To create the trusted host:
Содержание DGS-3312SR
Страница 2: ......
Страница 4: ......
Страница 57: ...DGS 3312SR Layer 3 Gigabit Switch 51 DGS 3312SR 4 disable rmon Command disable rmon Success DGS 3312SR 4...
Страница 305: ...DGS 3312SR Layer 3 Gigabit Switch 3 www dlink co uk...