DGS-3312SR Layer 3 Gigabit Switch
22
reboot
Purpose
Used to restart the switch.
Syntax reboot
Description
This command is used to restart the switch.
Parameters
None.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To restart the switch:
DGS-3312SR:4#reboot
Command: reboot
Are you sure want to proceed with the system reboot? (y/n)
Please wait, the switch is rebooting...
reset
Purpose
Used to reset the switch to the factory default settings.
Syntax
reset {[config | system]}
Description
This command is used to restore the switch’s configuration to the
default settings assigned from the factory.
Parameters
config
−
If the keyword ‘config’ is specified, all of the factory
default settings are restored on the switch including the IP
address, user accounts, and the switch history log. The switch will
not save or reboot.
system
−
If the keyword ‘system’ is specified all of the factory
default settings are restored on the switch. The switch will save
and reboot after the settings are changed to default. Rebooting
will clear all entries in the Forwarding Data Base.
If no parameter is specified, the switch’s current IP address, user
accounts, and the switch history log are not changed. All other
parameters are restored to the factory default settings. The switch
will not save or reboot.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To restore all of the switch’s parameters to their default values:
DGS-3312SR:4#reset config
Command: reset config
Success.
DGS-3312SR:4#
Содержание DGS-3312SR
Страница 2: ......
Страница 4: ......
Страница 57: ...DGS 3312SR Layer 3 Gigabit Switch 51 DGS 3312SR 4 disable rmon Command disable rmon Success DGS 3312SR 4...
Страница 305: ...DGS 3312SR Layer 3 Gigabit Switch 3 www dlink co uk...