D-Link DGS-3312SR, Справочное руководство по интерфейсу командной строки

Страница: 189 / 305

DGS-3312SR Layer 3 Gigabit Switch
183
Example usage:
To configure 802.1x reauthentication for ports 1-10:
DGS-3312SR:4#config 802.1x reauth port_based ports 1:1-1:18
Command: config 802.1x reauth port_based ports 1:1-1:18
Success.
DGS-3312SR:4#
config radius add
Purpose Used to add a new RADIUS server.
Syntax config radius add <server_index 1-3> <server_ip> key
<passwd 32> [default | {auth_port <udp_port_number 1-
65535> | acct_port <udp_port_number 1-65535>}]
Description The config radius add command is used to add RADIUS
servers to the switch.
Parameters
<server_index 1-3>
−
Assigns a number to the current set of
RADIUS server settings. Up to 3 groups of RADIUS server
settings can be entered on the switch. The lowest index number
will have a higher authenticative priority
<server_ip>
−
The IP address of the RADIUS server.
key
−
Specifies that a password and encryption key will be used
between the switch and the RADIUS server.
<passwd 32>
−
The shared-secret key used by the
RADIUS server and the switch. Up to 32 characters can be
used.
default
−
Uses the default udp port number in both the
“auth_port” and “acct_port” settings.
auth_port <udp_port_number>
−
The UDP port number for
authentication requests. The default is 1812.
acct_port <udp_port_number>
−
The UDP port number for
accounting requests. The default is 1813.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the RADIUS server communication settings:
DGS-3312SR:4#config radius add 1 10.48.74.121 key dlink default
Command: config radius add 1 10.48.74.121 key dlink default
Success.
DGS-3312SR:4#