D-Link DGS-3312SR, Справочное руководство по интерфейсу командной строки

Страница: 162 / 305

DGS-3312SR Layer 3 Gigabit Switch
156
config authen server_group
radius – Use this parameter to utilize the built-in RADIUS
server protocol on the switch. Only server hosts utilizing the
RADIUS protocol may be added to this group.
<string 15> Enter an alphanumeric string of up to 15
characters to define the previously created server group.
This group may add any combination of server hosts to it,
regardless of protocol.
[add | delete] – Enter the correct parameter to add or delete a server
host from a server group.
server_host <ipaddr> - Enter the IP address of the previously
configured server host the user wishes to add or delete.
protocol – Enter the protocol utilized by the server host. There are
three options:
tacacs – Use this parameter to define the protocol if the
server host is using the TACACS authentication protocol.
xtacacs – Use this parameter to define the protocol if the
server host is using the XTACACS authentication protocol.
– Use this parameter to define the protocol if the
server host is using the authentication protocol.
radius – Use this parameter to define the protocol if the
server host is using the RADIUS authentication protocol.
Restrictions Only administrator-level users can issue this command.
Example usage:
To add an authentication host to server group “group_1”:
DGS-3312SR:4#config authen server_group group_1 add server_host
10.1.1.121 protocol
Command: config authen server_group group_1 add server_host
10.1.1.121 protocol
Success.
DGS-3312SR:4#
delete authen server_group
Purpose Used to delete a user-defined authentication server group.
Syntax delete authen server_group <string 15>
Description This command will delete an authentication server group.
Parameters <string 15> - Enter an alphanumeric string of up to 15 characters to
define the previously created server group the user wishes to delete.
Restrictions Only administrator-level users can issue this command.
Example usage: