background image

DGS-3312SR Layer 3 Gigabit Switch

 

 

288

This Warranty applies on the condition that the product Registration Card is filled out and returned to a D-Link office within ninety (90) days of purchase.  A list 
of D-Link offices is provided at the back of this manual, together with a copy of the Registration Card. 

If the product proves defective within the applicable warranty period, D-Link will provide repair or replacement of the product.  D-Link shall have the sole 
discretion whether to repair or replace, and replacement product may be new or reconditioned.  Replacement product shall be of equivalent or better 
specifications, relative to the defective product, but need not be identical.  Any product or part repaired by D-Link pursuant to this warranty shall have a warranty 
period of not less than 90 days, from date of such repair, irrespective of any earlier expiration of original warranty period.  When D-Link provides replacement, 
then the defective product becomes the property of D-Link. 

Warranty service may be obtained by contacting a D-Link office within the applicable warranty period, and requesting a Return Material Authorization (RMA) 
number.  If a Registration Card for the product in question has not been returned to D-Link, then a proof of purchase (such as a copy of the dated purchase 
invoice) must be provided.  If Purchaser's circumstances require special handling of warranty correction, then at the time of requesting RMA number, Purchaser 
may also propose special procedure as may be suitable to the case. 

After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package to ensure that it will not be 
damaged in transit, and the RMA number must be prominently marked on the outside of the package. The package must be mailed or otherwise shipped to 
D-Link with all costs of mailing/shipping/insurance prepaid. D-Link shall never be responsible for any software, firmware, information, or memory data of 
Purchaser contained in, stored on, or integrated with any product returned to D-Link pursuant to this warranty. 

Any package returned to D-Link without an RMA number will be rejected and shipped back to Purchaser at Purchaser's expense, and D-Link reserves the right 
in such a case to levy a reasonable handling charge in addition mailing or shipping costs. 

Software: 

Warranty service for software products may be obtained by contacting a D-Link office within the applicable warranty period.  A list of D-Link offices is 
provided at the back of this manual, together with a copy of the Registration Card.  If a Registration Card for the product in question has not been returned to a 
D-Link office, then a proof of purchase (such as a copy of the dated purchase invoice) must be provided when requesting warranty service.  The term "purchase" 
in this software warranty refers to the purchase transaction and resulting license to use such software. 

D-Link warrants that its software products will perform in substantial conformance with the applicable product documentation provided by D-Link with such 
software product, for a period of ninety (90) days from the date of purchase from D-Link or its Authorized Reseller.  D-Link warrants the magnetic media, on 
which D-Link provides its software product, against failure during the same warranty period.  This warranty applies to purchased software, and to replacement 
software provided by D-Link pursuant to this warranty, but shall not apply to any update or replacement which may be provided for download via the Internet, or 
to any update which may otherwise be provided free of charge. 

D-Link's sole obligation under this software warranty shall be to replace any defective software product with product which substantially conforms to D-Link's 
applicable product documentation. Purchaser assumes responsibility for the selection of appropriate application and system/platform software and associated 
reference materials. D-Link makes no warranty that its software products will work in combination with any hardware, or any application or system/platform 
software product provided by any third party, excepting only such products as are expressly represented, in D-Link's applicable product documentation as being 
compatible.  D-Link's obligation under this warranty shall be a reasonable effort to provide compatibility, but D-Link shall have no obligation to provide 
compatibility when there is fault in the third-party hardware or software. D-Link makes no warranty that operation of its software products will be uninterrupted 
or absolutely error-free, and no warranty that all defects in the software product, within or without the scope of D-Link's applicable product documentation, will 
be corrected. 

Содержание DGS-3312SR


















































































































































































































































































































Отзывы: