DGS-3312SR Layer 3 Gigabit Switch
254
config pim
state [enable | disable]
– This can enable or disable PIM for the
specified IP interface. The default is disabled. Note that PIM
settings must also be enabled globally for the switch with the
enable pim
described below for PIM to operate on any configured
IP interfaces.
Restrictions Only
administrator-level users can issue this command.
Usage Example:
To configure PIM settings for IP interface “System”:
DGS-3312SR:4#config pim ipif System hello 35 jp_interval 70 state enable
Command: config pim ipif System hello 35 jp_interval 70 state enable
Success.
DGS-3312SR:4#
enable pim
Purpose
Used to enable PIM function on the switch.
Syntax
enable pim
Description
This command will enable PIM for the switch. PIM settings must first
be configured for specific IP interfaces using the
config pim
command.
Parameters None.
Restrictions Only
administrator-level users can use this command.
Usage Example:
To enable PIM as previously configured on the switch:
DGS-3312SR:4#enable pim
Command: enable pim
Success.
DGS-3312SR:4#
disable pim
Purpose
Used to disable PIM function on the switch.
Syntax
disable pim
Содержание DGS-3312SR
Страница 2: ......
Страница 4: ......
Страница 57: ...DGS 3312SR Layer 3 Gigabit Switch 51 DGS 3312SR 4 disable rmon Command disable rmon Success DGS 3312SR 4...
Страница 305: ...DGS 3312SR Layer 3 Gigabit Switch 3 www dlink co uk...