D-Link DGS-3312SR, Справочное руководство по интерфейсу командной строки

Страница: 124 / 305

DGS-3312SR Layer 3 Gigabit Switch
118
enable ipif
Purpose Used to enable an IP interface on the switch.
Syntax
enable ipif {<ipif_name 12> | all}
Description This command will enable the IP interface function on the switch.
Parameters
<ipif_name 12>
−
The name for the IP interface to be created. This
name cannot exceed 12 characters.
all – Entering this parameter will enable the IP interfaces currently
configured with this command.
Restrictions None.
Example usage:
To enable the ipif function on the switch:
DGS-3312SR:4#enable ipif s2
Command: enable ipif s2
Success.
DGS-3312SR:4#
create ipif
Purpose Used to create an IP interface on the switch.
Syntax
create ipif <ipif_name12> <network_address> <vlan_name
32> {state [enable | disable]} {secondary | {state [enable |
disable]}
Description This command will create an IP interface.
Parameters
<ipif_name 12>
−
The name for the IP interface to be created. The
user may enter an alphanumeric string of up to 12 characters to
define the IP interface.
<network_address>
−
IP address and netmask of the IP interface
to be created. The address and mask information can be specified
using the traditional format (for example, 10.1.2.3/255.0.0.0 or in
CIDR format, 10.1.2.3/8).
<vlan_name 32>
−
The name of the VLAN that will be associated
with the above IP interface.
secondary – Enter this parameter if this configured IP interface is
to be a secondary IP interface of the VLAN previously specified.
secondary interfaces can only be configured if a primary interface
is first configured.
state [enable | disable]
−
Allows you to enable or disable the IP
interface.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create an IP interface on the switch: