D-Link DGS-3312SR, Справочное руководство по интерфейсу командной строки

Страница: 277 / 305

DGS-3312SR Layer 3 Gigabit Switch
271
delete ospf aggregation
Purpose Used to delete an OSPF area aggregation configuration.
Syntax
delete ospf aggregation <area_id> <network_address>
lsdb_type summary
Description This command is used to delete an OSPF area aggregation
configuration.
Parameters
<area_id>
−
A 32-bit number in the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the
OSPF domain.
<network_address>
−
The 32-bit number in the form of an IP
address that uniquely identifies the network that corresponds to
the OSPF Area.
lsdb_type summary
−
Specifies the type of address aggregation.
Restrictions Only administrator-level users can issue this command.
Usage Example
To configure the OSPF area aggregation settings:
DGS-3312SR:4#delete ospf aggregation 10.1.1.1 10.48.76.122/16 lsdb_type
summary
Command: delete ospf aggregation 10.1.1.1 10.48.76..122/16 lsdb_type
summary
Success.
DGS-3312SR:4#
config ospf aggregation
Purpose Used to configure the OSPF area aggregation settings.
Syntax config ospf aggregation <area_id> <network_address>
lsdb_type summary {advertise [enable | disable]}
Description This command is used to configure the OSPF area aggregation
settings.
Parameters
<area_id>
−
A 32-bit number in the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the
OSPF domain.
<network_address>
−
The 32-bit number in the form of an IP
address that uniquely identifies the network that corresponds to
the OSPF Area.
lsdb_type summary
−
Specifies the type of address aggregation.
advertise [enable | disable]
−
Allows for the advertisement trigger
to be enabled or disabled.
Restrictions Only administrator-level users can issue this command.