D-Link DGS-3312SR, Справочное руководство по интерфейсу командной строки

Страница: 118 / 305

DGS-3312SR Layer 3 Gigabit Switch
112
Example usage:
To create a link aggregation group:
DGS-3312SR:4#create link_aggregation group_id 1
Command: create link_aggregation group_id 1
Success.
DGS-3312SR:4#
delete link_aggregation group_id
Purpose Used to delete a previously configured link aggregation group.
Syntax
delete link_aggregation group_id <value 1-6>
Description This command is used to delete a previously configured link
aggregation group.
Parameters
<value 1-6>
−
Specifies the group ID. The switch allows up to 6 link
aggregation groups to be configured. The group number identifies
each of the groups.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete link aggregation group:
DGS-3312SR:4#delete link_aggregation group_id 6
Command: delete link_aggregation group_id 6
Success.
DGS-3312SR:4#
config link_aggregation
Purpose Used to configure a previously created link aggregation group.
Syntax config link_aggregation group_id <value 1-6> {master_port
<port> | ports <portlist> | state [enable | disable]
Description This command allows you to configure a link aggregation group that
was created with the
create link_aggregation command above.
The DGS-3312SR supports link aggregation cross box which
specifies that link aggregation groups may be spread over multiple
switches in the switching stack.
Parameters
group _id <value 1-6>
−
Specifies the group ID. The switch allows
up to 6 link aggregation groups to be configured. The group number
identifies each of the groups.
master_port<port>
−
Master port ID. Specifies which port (by port
number) of the link aggregation group will be the master port. All of
the ports in a link aggregation group will share the port configuration