D-Link DGS-3312SR, Справочное руководство по интерфейсу командной строки

Страница: 184 / 305

DGS-3312SR Layer 3 Gigabit Switch
178
Example usage:
To display the 802.1x auth state:
DGS-3312SR:4#show 802.1x auth_state 1:1-1:12
Command: show 802.1x auth_state 1:1-1:12
Port Auth PAE State Backend State Port Status
------ ----------------------- --------------------- -----------------
1:1 ForceAuth Success Authorized
1:2 ForceAuth Success Authorized
1:3 ForceAuth Success Authorized
1:4 ForceAuth Success Authorized
1:5 ForceAuth Success Authorized
1:6 ForceAuth Success Authorized
1:7 ForceAuth Success Authorized
1:8 ForceAuth Success Authorized
1:9 ForceAuth Success Authorized
1:10 ForceAuth Success Authorized
1:11 ForceAuth Success Authorized
1:12 ForceAuth Success Authorized
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
config 802.1x auth_mode
Purpose Used to configure the 802.1x authentication mode on the switch.
Syntax config 802.1x auth_mode [port_based | mac_based]
Description The config 802.1x auth_mode command is used to enable either
the port-based or MAC-based 802.1x authentication feature on the
switch.
Parameters
[port_based | mac_based ports]
−
The switch allows you to
authenticate 802.1x by either port or MAC address.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure 802.1x authentication by MAC address:
DGS-3312SR:4#config 802.1x auth_mode mac_based
Command: config 802.1x auth_mode mac_based
Success.
DGS-3312SR:4#