D-Link DGS-3312SR, Справочное руководство по интерфейсу командной строки

Страница: 172 / 305

DGS-3312SR Layer 3 Gigabit Switch
166
To configure the SSH user:
DGS-3312SR:4# config ssh user Trinity authmode Password
Command: config ssh user Trinity authmode Password
Success.
DGS-3312SR:4#
show ssh user authmode
Purpose Used to display the SSH user setting.
Syntax show ssh user authmode
Description This command allows you to display the current SSH user setting.
Parameters None.
Restrictions Only adminstrator-level users can issue this command.
Example usage:
To display the SSH user:
DGS-3312SR:4#show ssh user authmode
Command: show ssh user authmode
Current Accounts: Authentication
UserName
-------------------------- --------------------------
Trinity Publickey
DGS-3312SR:4#
Note : To configure the SSH user, the administrator must create a user
account on the switch. For information concerning configuring a user
account, please see the section of this manual entitled
Basic Switch
Commands and then the command, create user account.
config ssh algorithm
Purpose Used to configure the SSH algorithm.
Syntax config ssh algorithm [3DES | AES128 | AES192 | AES256 |
arcfour | blowfish | cast128 | twofish128 | twofish192 |
twofish256 | MD5 | SHA1 | RSA | DSA] [enable | disable]
Description This command allows you to configure the desired type of SSH
algorithm used for authentication encryption.
Parameters 3DES – This parameter will enable or disable the Triple_Data
Encryption Standard encryption algorithm.