DGS-3312SR Layer 3 Gigabit Switch
160
Password: ******
DGS-3312SR:4#
config admin local_enable
Purpose
Used to configure the local enable password for administrator level
privileges.
Syntax
config admin local_enable
Description
This command will configure the locally enabled password for the
enable admin
command. When a user chooses the “
local_enable
”
method to promote user level privileges to administrator privileges,
he or she will be prompted to enter the password configured here,
that is set locally on the switch.
Parameters
<password 15>
- After entering this command, the user will be
prompted to enter the old password, then a new password in an
alphanumeric string of no more than 15 characters, and finally
prompted to enter the new password again to confirm. See the
example below.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To configure the password for the “local_enable” authentication method.
DGS-3312SR:4#config admin local_enable
Command: config admin local_enable
Enter the old password: ******
Enter the case-sensitive new password:******
Enter the new password again for confirmation:******
Success.
DGS-3312SR:4#
Содержание DGS-3312SR
Страница 2: ......
Страница 4: ......
Страница 57: ...DGS 3312SR Layer 3 Gigabit Switch 51 DGS 3312SR 4 disable rmon Command disable rmon Success DGS 3312SR 4...
Страница 305: ...DGS 3312SR Layer 3 Gigabit Switch 3 www dlink co uk...