D-Link DGS-3312SR, Справочное руководство по интерфейсу командной строки

Страница: 219 / 305

DGS-3312SR Layer 3 Gigabit Switch
213
To manually set system time and date settings:
DGS-3312SR:4#config time 30jun2003 16:30:30
Command: config time 30jun2003 16:30:30
Success.
DGS-3312SR:4#
config time zone
Purpose Used to determine the time zone used in order to adjust the
system clock.
Syntax
config time_zone {operator [+ | -] | hour <gmt_hour 0-13> |
min <minute 0-59>}
Description This will adjust system clock settings according to the time zone.
Time zone settings will adjust SNTP information accordingly.
Parameters operator – Choose to add (+) or subtract (-) time to adjust for time
zone relative to GMT.
hour – Select the number hours different from GMT.
min – Select the number of minutes difference added or
subtracted to adjust the time zone.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure time zone settings:
DGS-3312SR:4#config time_zone op hour 2 min 30
Command: config time_zone op hour 2 min 30
Success.
DGS-3312SR:4#
config dst
Purpose Used to enable and configure time adjustments to allow for the use of
Daylight Savings Time (DST).
Syntax config dst [disable | repeating {s_week <start_week 1-4,last> |
s_day <start_day sun-sat>| s_mth <start_mth 1-12> | s_time
<start_time hh:mm> | e_week <end_week 1-4,last> | e-day
<end_day sun-sat> | e_mth <end_mth 1-12> | e_time <end_time
hh:mm> | offset [30 | 60 | 90 | 120]} | annual {s_date <start_date
1-31> | s_mth <start_mth 1-12> | s_time <start_time hh:mm> |
e_date <end_date 1-31> | e_mth <end_mth 1-12> | e_time
<end_time hh:mm> | offset [30 | 60 | 90 | 120]}]
Description DST can be enabled and configured using this command. When
enabled this will adjust the system clock to comply with any DST
requirement. DST adjustment effects system time for both manually
configured time and time set using SNTP service.