D-Link DGS-3312SR, Справочное руководство по интерфейсу командной строки

Страница: 120 / 305

DGS-3312SR Layer 3 Gigabit Switch
114
config link_aggregation algorithm
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure link aggregation algorithm for mac-source-dest:
DGS-3312SR:4#config link_aggregation algorithm mac_source_dest
Command: config link_aggregation algorithm mac_source_dest
Success.
DGS-3312SR:4#
show link_aggregation
Purpose Used to display the current link aggregation configuration on the
switch.
Syntax show link_aggregation {group_id <value 1-6> | algorithm}
Description This command will display the current link aggregation configuration
of the switch.
Parameters
group_id <value 1-6>
−
Specifies the group ID. The switch allows up
to 6 link aggregation groups to be configured. The group number
identifies each of the groups.
algorithm
−
Allows you to specify the display of link aggregation by
the algorithm in use by that group.
Restrictions None.
Example usage:
To display Link Aggregation configuration:
DGS-3312SR:4#show link_aggregation
Command: show link_aggregation
Link Aggregation Algorithm = MAC-source-dest
Group ID : 1
Master Port : 2:10
Member Port : 1:5-1:10,2:10
Active Port:
Status : Disabled
Flooding Port : 1:5
DGS-3312SR:4