D-Link DGS-3312SR, Справочное руководство по интерфейсу командной строки

Страница: 60 / 305

DGS-3312SR Layer 3 Gigabit Switch
54
ping
Purpose Used to test the connectivity between network devices.
Syntax ping <ipaddr> {times <value 1-255>} {timeout <sec 1-99>}
Description The ping command sends Internet Control Message Protocol
(ICMP) echo messages to a remote IP address. The remote IP
address will then “echo” or return the message. This is used to
confirm connectivity between the switch and the remote device.
Parameters <ipaddr> - Specifies the IP address of the host.
times <value 1-255> - The number of individual ICMP echo
messages to be sent. The maximum value is 255. The default is 0.
timeout <sec 1-99> - Defines the time-out period while waiting for a
response from the remote device. A value of 1 to 99 seconds can
be specified. The default is 1 second.
Pinging an IP address without the times parameter will ping the
target device an infinite amount of times.
Restrictions Only administrator-level users can issue this command.
Example usage:
To ping the IP address 10.48.74.121 four times:
DGS-3312SR:4#ping 10.48.74.121 times 4
Command: ping 10.48.74.121 times 4
Reply from 10.48.74.121, time<10ms
Reply from 10.48.74.121, time<10ms
Reply from 10.48.74.121, time<10ms
Reply from 10.48.74.121, time<10ms
Ping statistics for 10.48.74.121
Packets: Sent =4, Received =4, Lost =0
DGS-3312SR:4#
traceroute
Purpose Used to trace the routed path between the switch and a destination
endstation.
Syntax
<ipaddr> {ttl <value 1-60> | port <value 30000-64900> | timeout
<sec 1-65535> | probe <value <1-9>
Description The traceroute command allows you to trace a route between the
switch and a give host on the network.
Parameters <ipaddr> - Specifies the IP address of the host.
ttl <value 1-60> - The time to live value of the trace route request.
This is the maximum number of routers the traceroute command will
cross while seeking the network path between two devices.
port <value 30000-64900> The port number. Must be above
1024.The value range is from 30000 to 64900 .
timeout <sec 1-65535> - Defines the time-out period while waiting for
a response from the remote device. The user may choose an entry