D-Link DGS-3312SR, Справочное руководство по интерфейсу командной строки

Страница: 46 / 305

DGS-3312SR Layer 3 Gigabit Switch
40
show snmp engineID
Purpose Used to display the identification of the SNMP engine on the
switch.
Syntax
show snmp engineID
Description
The show snmp engineID command displays the identification
of the SNMP engine on the switch.
Parameters None.
Restrictions None.
Example usage:
To display the current name of the SNMP engine on the switch:
DGS-3312SR:4#show snmp engineID
Command: show snmp engineID
SNMP Engine ID : 0035636666
DGS-3312SR:4#
create snmp group
Purpose Used to create a new SNMP group, or a table that maps SNMP
users to SNMP views.
Syntax create snmp group <groupname 32> [v1 | v2c | v3
[noauth_nopriv | auth_nopriv | auth_priv]] {read_view
<view_name 32> | write_view <view_name 32> | notify_view
<view_name 32>}
Description The create snmp group command creates a new SNMP group,
or a table that maps SNMP users to SNMP views.
Parameters
<groupname 32>
−
An alphanumeric name of up to 32 characters
that will identify the SNMP group with which the new SNMP user
will be associated.
v1 – Specifies that SNMP version 1 will be used. The Simple
Network Management Protocol (SNMP), version 1, is a network
management protocol that provides a means to monitor and
control network devices.
v2c – Specifies that SNMP version 2c will be used. The SNMP
v2c supports both centralized and distributed network
management strategies. It includes improvements in the Structure
of Management Information (SMI) and adds some security
features.
v3 – Specifies that the SNMP version 3 will be used. SNMP v3
provides secure access to devices through a combination of
authentication and encrypting packets over the network. SNMP v3
adds: