D-Link DGS-3312SR, Справочное руководство по интерфейсу командной строки

Страница: 240 / 305

DGS-3312SR Layer 3 Gigabit Switch
234
Allowed Metric Type combinations are mettype 1 or mettype 2 . The metric value 0 above will be redistributed in OSPF as the
metric 20 .
Example Usage:
To configure route redistributions:
DGS-3312SR:4#config route redistribute dst ospf src all metric 2
Command: config route redistribute dst ospf src all metric 2
Success.
DGS-3312SR:4#
config route redistribute dst rip src
Purpose Used configure route redistribution settings for the exchange of
RIP routes to OSPF routes on the switch.
Syntax config route redistribute dst rip src [local | static | ospf | [all |
internal | external | type_1 | type_2 | inter+e1 | inter+e2]]
{metric <value>}
Description Route redistribution allows routers on the network that are running
different routing protocols to exchange routing information. This is
accomplished by comparing the routes stored in the various
router’s routing tables and assigning appropriate metrics. This
information is then exchanged among the various routers
according to the individual routers current routing protocol. The
switch can redistribute routing information between the OSPF and
RIP routing protocols to all routers on the network that are running
OSPF or RIP. Routing information entered into the Static Routing
Table on the local switch is also redistributed.
Parameters
src {all | internal | external | type_1 | type_2 | inter+e1 | inter+e2}
−
Allows the selection of the protocol of the source device.
metric <value>
−
Allows the entry of an OSPF interface cost. This
is analogous to a Hop Count in the RIP routing protocol.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To configure route redistributions:
DGS-3312SR:4#config route redistribute dst ospf src rip mettype
type_1 metric 2
Command: config route redistribute dst ospf src rip mettype
type_1 metric 2
Success.
DGS-3312SR:4#