D-Link DGS-3312SR, Справочное руководство по интерфейсу командной строки

Страница: 119 / 305

DGS-3312SR Layer 3 Gigabit Switch
113
config link_aggregation
with the master port.
ports <portlist>
−
Specifies a range of ports that will belong to the
link aggregation group. The port list is specified by listing the lowest
switch number and the beginning port number on that switch,
separated by a colon. Then the highest switch number, and the
highest port number of the range (also separated by a colon) are
specified. The beginning and end of the port list range are separated
by a dash. For example, 1:3 specifies switch number 1, port 3. 2:4
specifies switch number 2, port 4. 1:3-2:4 specifies all of the ports
between switch 1, port 3 and switch 2, port 4
−
in numerical order.
state [enable | disable]
−
Allows you to enable or disable the
specified link aggregation group.
Restrictions Only administrator-level users can issue this command. Link
aggregation groups may not overlap. Link aggregation members
cannot be configured as a mirrored port or target port of a mirroring
configuration.
Example usage:
To define a load-sharing group of ports, group-id 1, master port 5 of module 1 with group members ports 5-7 plus port
9:
DGS-3312SR:4#config link_aggregation group_id 1 master_port 1:5 ports 1:5-1:7, 1:9
Command: config link_aggregation group_id 1 master_port 1:5 ports 1:5-1:7, 1:9
Success.
DGS-3312SR:4#
config link_aggregation algorithm
Purpose Used to configure the link aggregation algorithm.
Syntax
config link_aggregation algorithm [mac_source |
mac_destination | mac_source_dest | ip_source |
ip_destination | ip_source_dest]
Description This command configures to part of the packet examined by the
switch when selecting the egress port for transmitting load-sharing
data. This feature is only available using the address-based load-
sharing algorithm.
Parameters
mac_source
−
Indicates that the switch should examine the MAC
source address.
mac_destination
−
Indicates that the switch should examine the
MAC destination address.
mac_source_dest
−
Indicates that the switch should examine the
MAC source and destination addresses
ip_source
−
Indicates that the switch should examine the IP source
address.
ip_destination
−
Indicates that the switch should examine the IP
destination address.
ip_source_dest
−
Indicates that the switch should examine the IP
source address and the destination address.