DGS-3312SR Layer 3 Gigabit Switch
60
Example usage:
To clear the log information:
DGS-3312SR:4#clear log
Command: clear log
Success.
DGS-3312SR:4#
show log
Purpose
Used to display the switch history log.
Syntax
show log {index <value>}
Description
This command will display the contents of the switch’s history log.
Parameters
index <value>
−
Enter a value that corresponds to an entry made
in the log. Multiple entries may be made in the form of
x-x
where x
is the number of an entry in the log. The smallest number (and
therefore the earlier entry) will be first.
Restrictions None.
Example usage:
To display the switch history log
:
DGS-3312SR:4#show log index 1-4
Command: show log index 1-4
Index Time Log Text
----- -------- -----------------------------------------------------
4 01:54:53 Port 1:13 link up, 100Mbps FULL duplex
3 01:54:53 Spanning Tree Protocol is enabled
2 01:54:53 Unit 1, System started up
1 06:06:09 Spanning Tree Protocol is disabled
DGS-3312SR:4#
enable syslog
Purpose
Used to enable the system log to be sent to a remote host.
Syntax
enable syslog
Description
The
enable syslog
command enables the system log to be sent
to a remote host.
Parameters None.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To the syslog function on the switch:
Содержание DGS-3312SR
Страница 2: ......
Страница 4: ......
Страница 57: ...DGS 3312SR Layer 3 Gigabit Switch 51 DGS 3312SR 4 disable rmon Command disable rmon Success DGS 3312SR 4...
Страница 305: ...DGS 3312SR Layer 3 Gigabit Switch 3 www dlink co uk...