D-Link DGS-3312SR, Справочное руководство по интерфейсу командной строки

Страница: 253 / 305

DGS-3312SR Layer 3 Gigabit Switch
247
disable rip
Purpose Used to disable RIP.
Syntax
disable rip
Description This command is used to disable RIP on the switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To disable rip:
DGS-3312SR:4#disable rip
Command: disable rip
Success.
DGS-3312SR:4#
show rip
Purpose Used to display the RIP configuration and statistics for the switch.
Syntax
show rip {ipif <ipif_name 12>}
Description This command will display the RIP configuration and statistics for
a given IP interface or for all IP interfaces.
Parameters
ipif <ipif_name 12>
−
The name of the IP interface for which you
want to display the RIP configuration and settings. If this
parameter is not specified, the
show rip command will display
the global RIP configuration for the switch.
Restrictions None.
Example Usage:
To display RIP configuration:
DGS-3312SR:4#show rip
Command: show rip
RIP Global State : Disabled
RIP Interface Settings
Interface IP Address TX Mode RX Mode Authen- State
tication
------------- ------------------ ---------- ------------- ---------- -----
System 10.41.44.33/8 Disabled Disabled Disabled Disabled
Total Entries : 1
DGS-3312SR:4#