D-Link DGS-3312SR, Справочное руководство по интерфейсу командной строки

Страница: 185 / 305

DGS-3312SR Layer 3 Gigabit Switch
179
config 802.1x capability ports
Purpose Used to configure the 802.1x capability of a range of ports on the
switch.
Syntax
config 802.1x capability ports [<portlist> | all] [authenticator |
none]
Description
The config 802.1x capability ports command has four
capabilities that can be set for each port. Authenticator,
Supplicant, Authenticator and Supplicant, and None.
Parameters
<portlist>
−
Specifies a range of ports. The port list is specified by
listing the lowest switch number and the beginning port number on
that switch, separated by a colon. Then the highest switch
number, and the highest port number of the range (also separated
by a colon) are specified. The beginning and end of the port list
range are separated by a dash. For example, 1:3 specifies switch
number 1, port 3. 2:4 specifies switch number 2, port 4. 1:3-2:4
specifies all of the ports between switch 1, port 3 and switch 2,
port 4
−
in numerical order.
all
−
Specifies all of the ports on the switch.
authenticator
−
A user must pass the authentication process to
gain access to the network.
none
−
The port is not controlled by the 802.1x functions.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure 802.1x capability on ports 1-10 on switch 1:
DGS-3312SR:4#config 802.1x capability ports 1:1 – 1:10 authenticator
Command: config 802.1x capability ports 1:1 – 1:10 authenticator
Success.
DGS-3312SR:4#
config 802.1x auth_parameter
Purpose Used to configure the 802.1x Authentication parameters on a
range of ports. The default parameter will return all ports in the
specified range to their default 802.1x settings.
Syntax
config 802.1x auth_parameter ports [<portlist> | all]
[default | {direction [both | in] | port_control [force_unauth |
auto | force_auth] | quiet_period <sec 0-65535>| tx_period
<sec 1-65535> | supp_timeout <sec 1-65535> |
server_timeout <sec 1-65535> | max_req <value 1-10> |
reauth_period <sec 1-65535> | enable_reauth [enable |
disable]}]
Description
The config 802.1x auth_parameter command is used to
configure the 802.1x Authentication parameters on a range of
ports. The default parameter will return all ports in the specified
range to their default 802.1x settings.