D-Link DGS-3312SR, Справочное руководство по интерфейсу командной строки

Страница: 171 / 305

DGS-3312SR Layer 3 Gigabit Switch
165
DGS-3312SR:4# show ssh server
Command: show ssh server
The SSH server configuration
max Session : 8
Connection timeout : 300 (sec)
Authfail attempts : 2
Rekey timeout : never
SSH server status : Disable
Listened Port Number : 22
DGS-3312SR:4#
config ssh user
Purpose Used to configure the SSH user.
Syntax config ssh user <username> authmode {Hostbased [hostname
<string> | hostname_IP <string> <ipaddr>} | Password |
Publickey | None]
Description This command allows you to configure the SSH user authentication
method.
Parameters <username> - Enter a username of no more than 15 characters to
identify the SSH user.
authmode – Specifies the authentication mode of the SSH user
wishing to log on to the switch. The administrator may choose
between:
Hostbased – This parameter should be chosen if the user
wishes to use a remote SSH server for authentication purposes.
Choosing this parameter requires the user to input the following
information to identify the SSH user.
•
hostname <string> - Enter an alphanumeric
string of up to 31 characters identifying the
remote SSH user.
•
hostname_IP <string> <ipaddr> - Enter the
hostname and the corresponding IP
address of the SSH user.
Password – This parameter should be chosen if the user
wishes to use an administrator defined password for
authentication. Upon entry of this command, the switch will
prompt the user for a password, and then to retype the
password for confirmation.
Publickey – This parameter should be chosen if the user
wishes to use the publickey on a SSH server for authentication.
None – Choose this parameter if no authentication is
desired.
Restrictions Only administrator-level users can issue this command.
Example usage: