D-Link DGS-3312SR, Справочное руководство по интерфейсу командной строки

Страница: 238 / 305

DGS-3312SR Layer 3 Gigabit Switch
232
Route Source Metric Metric Type
RIP 0 to 16777214 mettype 1
mettype 2
Static 0 to 16777214 mettype 1
mettype 2
Local 0 to 16777214 mettype 1
mettype 2
Allowed Metric Type combinations are mettype 1 or mettype 2 . The metric value 0 above will be redistributed in OSPF as the
metric 20 .
Example Usage:
To add route redistribution settings:
DGS-3312SR:4#create route redistribute dst ospf src rip
Command: create route redistribute dst ospf src rip
Success.
DGS-3312SR:4#
create route redistribute dst rip src
Purpose Used to add route redistribution settings for the exchange of OSPF
routes to RIP routes on the switch.
Syntax create route redistribute dst rip src {all | internal | external |
type_1 | type_2 | inter+e1 | inter+e2}] {metric <value>}
Description This command will redistribute routing information between the
OSPF and RIP routing protocols to all routers on the network that
are running OSPF or RIP. Routing information entered into the
Static Routing Table on the local DGS-3312SR switch is also
redistributed
Parameters
src {all | internal | external | type_1 | type_2 | inter+e1 | inter+e2}
−
Allows the selection of the protocol of the source device.
metric <value>
−
Allows the entry of an OSPF interface cost. This is
analogous to a HOP Count in the RIP routing protocol.
Restrictions Only administrator-level users can issue this command.
Routing information source
−
OSPF and the Static Route table. Routing information will be redistributed to RIP. The following
table lists the allowed values for the routing metrics and the types (or forms) of the routing information that will be redistributed.
Route Source Metric Type
OSPF 0 to 16
all
type_1
type_2
inter+e1
inter+e2
external
internal
Static 0 to 16 not applicable