Software
Crestron
D3 Pro
™
Click the
I/O Assignment
tab to view or change the port assignment of the device. If
the device is controlled via IR, you can select a different port from the list.
If the device is controlled serially, you can view or change the serial settings.
The
Properties
tab lists parameters that are contained in the Crestron module that
controls the device (not all devices have a Properties tab). Each parameter consists of
a property with a corresponding default value. You can overwrite the default value,
either by selecting a different value from the drop-down list or by entering a new
value manually. If you are unsure about the meaning of a property, select it to display
a description in the lower pane.
42
•
Crestron D3 Pro™
Reference Guide – DOC. 5998a