Software
Crestron
D3 Pro
™
You can add a generic fixture in a number of ways:
•
Drag the generic fixture from either library in the Fixtures toolbox to a room.
•
If you select a room in the system tree, you can also drag the fixture from the
toolbox onto the Load Schedule area in the center of the screen.
•
To add multiple fixtures, hold down the Shift key while you drag the fixture
from the toolbox to a room. Then select the number of fixtures you want to
add. You can also hold down the Shift key, right-click a room, point to
New
,
and select the fixture. Then select the amount.
•
You can right-click a room, point to
New
, and then select a generic fixture
from the submenu. A generic fixture appears as one of the 16 main fixture
categories.
To add a user-defined fixture:
•
Drag the fixture from the Global or Project library to a room, just as
described above. User-defined fixtures appear as sub-categories of a generic
fixture.
•
You can right-click a room, point to
New
, and then point to the generic
fixture category. Select the user-defined fixture from the submenu.
•
Use the methods described above to add multiple user-defined fixtures.
22
•
Crestron D3 Pro™
Reference Guide – DOC. 5998a
