Crestron
D3 Pro
™
Software
To combine text areas
1. Verify
that
Show Text Area Outlines
is enabled on the right-click submenu.
2. Click each text area while pressing the Ctrl key. (You can only group two
text areas at a time.)
3. Right-click and choose
Combine Text Areas
from the submenu.
4. If you have two long text areas in one row, you can repeat steps 2 and 3 to
create one text area that stretches across the entire row.
5. To revert to the smaller text area setting, select the long text area, right-click
and choose
Uncombine Text Areas
from the submenu.
Entering Text and Lines -
When you enter text in an engravable area, you can also
draw lines around the text and button(s). In this way you can separate buttons from
one another, or you can create a border around related buttons.
To enter text
1. Double-click the engravable text area.
2. Go
to
Field One
and select a font from the
Font
list.
As shown in the diagram on page 18, you can choose from two fonts:
Arial
,
for readable text; and
Crestron Transport Outline
, which consists of
symbols that represent standard device functions such as Fast Forward,
Rewind, Volume Up and Volume Down. Each symbol corresponds to a letter
of the alphabet from A to P,
not
case sensitive.
After selecting the font, enter the desired text in the
Field One
text box.
If you enter text only in the Field One text box, you can align the text
horizontally and vertically by selecting from the
Align Text
lists.
3. You can click the
Field Two
check box to enter a second line of text. Here
you can choose a font just as described above.
4. You have the further option to place Field One on top of Field Two (click
Two Horizontal Fields
), or to place the two fields next to each other (click
One Horizontal Field
). Choose the latter if you want to use two different
fonts within the same line.
If you have text in Field One and Field Two, you can only align the text
horizontally, not vertically.
To draw lines around a text area
1. After you enter the desired text and align it within the text area, select the
check boxes that appear around the drawing of the text area and button.
For example, if you want to draw a vertical line on the left side of the text
area/button(s), click the check box on the left side. To draw a border around
the entire area, click all four check boxes.
Reference Guide – DOC. 5998a
Crestron D3 Pro™
•
19
