Creo CXP6000 Color Server, Руководство пользователя

Страница: 254 / 514

240 Chapter 6 – Production Printing
The
Margins
parameter uses the following terminology:
•
The
Margins size
is the distance between the outside edges of the sheet
and the edges of the pages printed on the sheet. The value that you set
is not the exact distance. The Spire CXP6000 color server calculates the
exact distance in accordance with other imposition parameters.
•
The
Gutter size
is the inside space between pairs of pages on a sheet.
When folded into a signature / booklet, the gutter allows space for
trimming.
•
The
Spine trim size
is the space between adjacent pages on a printed
sheet. When the sheet is folded into a signature / booklet, this space
allows you to roughen the edges for perfect binding.
To set the margins:
¾
In the
Margins options
area, type the required margin sizes.
Note: For specific sheet templates, there may be no gutter at all or only one
gutter—for example, in two up, there is no gutter. In these cases, the gutter
size setting is ignored.
Note: You use spine trim size with the perfect bound method only. If the
saddle stitch method is used, this value is set to zero and the pages are
printed side by side without any space between them.
Note: Units of measurement (mm or inches) reflect system configuration and
are selected in the Settings window, see Localization on page 421.