Configuration Wizards
Using the Remote Access VPN Wizard
Cisco ISA500 Series Integrated Security Appliances Administration Guide
59
2
Configuring IPsec Remote Access User Groups
STEP 20
Use the IPsec Remote Access - User Group page to configure the users and user
groups for IPsec remote access. The IPsec Remote Access service must be
enabled for each user group. All members of the user groups can use the
specified group policy to establish the VPN connections.
STEP 21
Click
Add
to add a user group.
Other options:
To edit an entry, click the
Edit
(pencil) icon. To delete an entry, click
the
Delete
(x) icon. To delete multiple entries, check them and click
Delete
.
STEP 22
In the
Group Settings
tab, enter the following information:
•
Name:
Enter the name for the user group.
•
Services:
Specify the service policy for the user group. The
IPsec Remote
Access
service must be enabled for this user group so that all members of
the group can establish the VPN tunnel to securely access your network
resources.
STEP 23
In the
Membership
tab, specify the members of the user group. You must add at
least one user in the user group before proceeding.
•
To add a member, select an existing user from the
User
list and click the right
arrow. The members of the group appear in the
Membership
list.
•
To delete a member from the group, select the member from the
Membership
list and then click the left arrow.
•
To create a new user, enter the username in the
User Name
field and the
password in the
Password
field, enter the same password in the
Password
Confirm
field for confirmation, and then click
Create
.
STEP 24
Click
OK
to save your settings.
STEP 25
After you are finished, click
Next
.
Viewing IPsec Remote Access Summary
STEP 26
Use the IPsec Remote Access - Summary page to view information for the
specified IPsec Remote Access group policy and user groups.
STEP 27
To modify any settings, click
Back
. If the configuration is correct, click
Finish
to
apply your settings.
