Device Management
Log Management
Cisco ISA500 Series Integrated Security Appliances Administration Guide
395
10
•
To Email Address:
The email address used to receive the logs.
•
SMTP Server:
The IP address or Internet name of the SMTP server.
•
SMTP Authentication:
Shows if the SMTP authentication is enabled or
disabled.
NOTE:
The above email server settings are read only. You must enable the
Syslog Email feature and configure the email server settings to send the
syslog messages to a specified email address. You can click the
Set Email
Alert
link or go to the Device Management > Administration > Email Alert
page to do this. See
Configuring Email Alert Settings, page 358
.
•
Mail Subtitle:
Enter the subtitle that is displayed in the email. For example, if
you set the device name as the subtitle, the email recipient can recognize
quickly what device the logs or alerts are coming from.
•
Severity:
Choose the severity level for the logs that you want to send.
For example: If you select Critical, all logs listed under the Critical,
Emergency, and Alert categories are sent.
STEP 5
In the
Email Schedule
area, specify the schedule to send the logs.
•
Frequency:
Choose the period of time that you want to send the logs.
-
Hourly:
Send the logs on an hourly basis.
Severity Level
Description
Emergency
(level 0,
highest severity)
System unusable.
Alert
(level 1)
Immediate action needed.
Critical
(level 2)
Critical conditions.
Error
(level 3)
Error conditions.
Warning
(level 4)
Warning conditions.
Notification
(level 5)
Normal but significant conditions.
Information
(level 6)
Informational messages only.
Debug
(level 7, lowest
severity)
Debugging messages.
