Cisco DS-C9216I-K9, Руководство по настройке

Страница: 396 / 436

30-8
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
OL-7753-01
Chapter 30 Monitoring Network Traffic Using SPAN
Monitoring Traffic Using Fibre Channel Analyzers
Figure 30-5 Fibre Channel Analyzer Usage Without SPAN
This type of connection has the following limitations:
• Requires you to physically insert the FC analyzer between the two network devices.
•
It disrupts traffic when the Fibre Channel analyzer is physically connected.
• The analyzer captures data only on the rx links in both port 1 and port 2. Port 1 captures traffic
exiting interface fc1/1 and port 2 captures ingress traffic into interface fc1/1.
Using SPAN
Using SPAN, you can capture the same traffic scenario shown in Figure 30-5 without any traffic
disruption. The Fibre Channel analyzer uses the ingress (rx) link at port 1 to capture all the frames going
out of the interface fc1/1. It uses the ingress link at port 2, to capture all the ingress traffic on interface
fc1/1.
Using SPAN you can monitor ingress traffic on fc1/1 at SD port fc2/2 and egress traffic on SD port fc2/1.
This traffic is seamlessly captured by the FC analyzer as shown in
Figure 30-6 .
Cisco
MDS 9000
switch
Cisco
MDS 9000
switch
fc1/1
fc1/1
RX
TX RX
=TX
1 2
FC Analyzer
Storage
device
Storage
device
FC Analyzer usage without SPAN
85651