Cisco DS-C9216I-K9, Руководство по настройке

Страница: 117 / 436

9-3
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
OL-7753-01
Chapter 9 Managing Modules
Identifying Module LEDs
Identifying Module LEDs
Table 9-3 describe the LED location, type, and status for supervisor and switching modules used in Cisco
MDS 9000 Family switches.
Table 9-4 lists the system and power management LEDs on a redundant supervisor module that are
synchronized to the active supervisor module.
Table 9-3 Module LEDs on a Cisco MDS 9200 Series Switch
Module LED Type Status Description
Fixed switching module Status Green • All chassis environmental monitors (power
supply, fan, temperature sensor, clock, and
chassis) are reporting OK.
•
Sufficient power is available for all
modules
Orange
•
Any one of the chassis environmental
monitors (power supply, fan, temperature
sensor, clock, and chassis) failed.
• Sufficient power is not available for all
modules.
•
Incompatible power supplies are installed.
• The redundant clock failed.
Red
•
The diagnostic test failed.
•
The module is not operational because a
fault occurred during the initialization
sequence.
•
A temperature condition occurred. (A
major threshold was exceeded during
environmental monitoring.)
Optional switching
module System Green All diagnostics pass. The module is operational
(normal initialization sequence).
Orange • The module is booting or running
diagnostics (normal initialization
sequence).
•
An over temperature condition occurred.
(A minor threshold was exceeded during
environmental monitoring.)
Red
•
The diagnostic test failed. The module is
not operational because a fault occurred
during the initialization sequence.
• An over temperature condition occurred.
(A major threshold was exceeded during
environmental monitoring.)