30-15
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
OL-7753-01
Chapter 30 Monitoring Network Traffic Using SPAN
Remote SPAN
Configuring the SD Port
The SD port in the destination switch enables the FC Analyzer to receive the RSPAN traffic from the
Fibre Channel tunnel. depicts a RSPAN tunnel configuration, now that tunnel destination is also
configured.
Figure 30-12
RSPAN Tunnel Configuration
SD ports cannot be configured using Advanced Services Modules (ASMs).
Mapping the FC Tunnel
The
tunnel-id-map
option specifies the egress interface of the tunnel at the destination switch.
Figure 30-13
FC Tunnel Configuration
Configuring An Explicit Path
You can specify an explicit path through the Cisco MDS Fibre channel fabric (source-based routing), use
the
explicit-path
option. For example, if you have multiple paths to a tunnel destination, you can use
this option to specify the fc-tunnel to always take one path to the destination switch. The software then
use this specified path even if other paths are available.
Cisco MDS
source switch S
Cisco MDS
destination switch D
ST
Cisco MDS
Fibre Channel
fabric
99014
RSPAN tunnel
ST port
SD port
IP address of VSAN 5
interface = 10.10.10.2
IP address of VSAN 5
interface = 10.10.10.1
SD
FC Analyzer
fc2/1
Cisco MDS
source switch S
Cisco MDS
destination switch D
ST
Cisco MDS
Fibre Channel
fabric
99016
FC tunnel destination
ST port
IP address of VSAN 5
interface = 10.10.10.2
fc2/1
IP address of VSAN 5
interface = 10.10.10.1
Содержание DS-C9216I-K9
Страница 26: ...Contents xxvi Cisco MDS 9000 Fabric Manager Switch Configuration Guide OL 7753 01 ...
Страница 42: ...xlii Cisco MDS 9000 Fabric Manager Switch Configuration Guide OL 7753 01 New and Changed Information ...
Страница 128: ...10 8 Cisco MDS 9000 Fabric Manager Switch Configuration Guide OL 7753 01 Chapter 10 Managing System Hardware ...