Cisco DS-C9216I-K9, Руководство по настройке

Страница: 118 / 436

9-4
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
OL-7753-01
Chapter 9 Managing Modules
Identifying Module LEDs
Table 9-5 lists the Ethernet interface LEDs on a Cisco MDS 9200 Series Switch.
Table 9-6 lists the switching module LEDs.
Table 9-4 Supervisor Module LEDs on a Cisco MDS 9500 Series Switch
LED Status Description
Status Green All diagnostics pass. The module is online.
Orange • The module is booting or running diagnostics
(normal initialization sequence).
•
The module is not online.
• An over temperature condition has occurred.
(A minor threshold has been exceeded during
environmental monitoring.)
Red
•
The diagnostic test failed. The module is not
operational because a fault occurred during
the initialization sequence.
• An over temperature condition has occurred.
(A major threshold has been exceeded during
environmental monitoring.)
System Green All chassis environmental monitors (power supply,
fan, temperature sensor, clock, and chassis) are
reporting OK.
Orange
•
Any one of the environmental monitors
(power supply, fan, temperature sensor, clock,
and chassis) has failed.
• Incompatible power supplies are installed.
•
The redundant clock has failed.
Red The temperature of the supervisor module major
threshold has been exceeded.
Active Green The supervisor module is operational and active.
Orange The supervisor module is in standby mode.
Pwr Mgmt1 Green Sufficient power is available for all modules.
Orange Sufficient power is not available for all modules.
Table 9-5 Ethernet Interface LEDs on a Cisco MDS 9200 Series Switch
Module LED Type Status Description
Ethernet (mgmt 0) Activity Flashing green Traffic is passing
through the interface.
Link Solid green The link is functioning.
Off The link is down.