Cisco DS-C9216I-K9, Руководство по настройке

Страница: 319 / 436

24-31
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
OL-7753-01
Chapter 24 Configuring IP Storage
Configuring iSCSI
Figure 24-23 Virtual Target with an Active Primary Port
To configure the trespass feature, follow these steps:
Step 1 Choose End Devices > iSCSI from the Physical Attributes pane in Fabric Manager, or choose IP >
iSCSI from Device Manager. You see the iSCSI tables in the Fabric Manager Information pane, or the
Device Manager iSCSI dialog box.
Step 2
Click the Targets tab to display a list of existing iSCSI targets.
Step 3 Check the Trespass Mode check box to enable this option.
Step 4
Click the Apply Changes icon in Fabric Manager (or click Apply in Device Manager ) to save this
change, or click Cancel to close the dialog box without saving any changes.
iSCSI Virtual Target Configuration Examples
This section provides three examples of virtual target configurations.
Example 1
This example assigns the whole Fibre Channel target as a virtual iSCSI target. All LUNs that are part of
the Fibre Channel target are available as part of the iSCSI target.
Figure 24-24 Assigning iSCSI Node Names
Example 2
This example maps a subset of LUNs of a Fibre Channel target to three iSCSI virtual targets. Each iSCSI
target only has one LUN.
iSCSI iSCSI
FC FC
IP Addr 10.1.1.1
iqn.initiator.abc
IP Addr 10.1.1.2
iqn.virtual-target.abc
pWWN a1:97:ac
fcid 0610003
pWWN a1:94:cc
fcid 0x550002
IP network
Primary
Secondary
105219