Cisco DS-C9216I-K9, Руководство по настройке

Страница: 158 / 436

14-4
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
OL-7753-01
Chapter 14 Configuring PortChannels
About PortChanneling and Trunking
Managing PortChannel General Attributes
To manage PortChannels, perform the following steps:
Step 1 Choose choose Switches > PortChannels from the Fabric Manager menu tree, or choose Interface >
PortChannels from the Device View. The Information pane in Fabric Manager displays attributes for
multiple switches. The dialog box from Device Manager displays attributes for a single switch.
Step 2
To add ports to a PortChannel, click Create . You see the Create PortChannel dialog box.
Step 3 To add members to the PortChannel, enter the IP address of the switch into the MemberList field.
Identify the other options you want to use and click
OK .
Managing PortChannel Interface Attributes
To manage PortChannel interface attributes, such as the port mode and trunking from the Fabric
Manager, choose
Switches > PortChannels from the menu tree.
To manage PortChannel interface attributes from the Device Manager, choose Interface >
PortChannels and click the Interfaces tab.
The Information pane in Fabric Manager displays attributes for multiple switches. The dialog box from
Device Manager displays attributes for a single switch.
Quiescing/Disabling Port Channel Members
When quiescing, the following apply:
•
If an ISL is already quiesced, the message ‘port already quiesced’ is displayed.
• If only one port exists in port channel, a message to that effect is displayed.
•
For a port channel between a switch running MD SAN-OS 1.2 and MDS SAN-OS 1.3, the quiesce
is performed only on the switch running version 1.3 (or higher). A port shutdown is then run on both
switches.
To quiesce a port channel member ISL and administratively bring down both ports, perform these steps:
Step 1 In the Fabric Manager Map pane, right-click on the ISL you want to bring down.
You see the Port Channel menu.
Step 2 Choose Port Channel > Quiesce and Disable Member .
A confirmation dialog displays, allowing you to choose the ISL you want to bring down.
Step 3 Choose the ISL you want to bring down.
Step 4
Click OK to bring down the ISL, or click Cancel to close the dialog without bringing down an ISL.