Cisco DS-C9216I-K9, Руководство по настройке

Страница: 275 / 436

23-13
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
OL-7753-01
Chapter 23 Configuring FICON
Creating FICON VSANs (enabling FICON) Using Device Manager
Step 10
Choose FICON > VSANs . You see the FICON VSANs dialog box.
Step 11 Enter the VSAN membership information.
Creating FICON VSANs (enabling FICON) Using Device Manager
The VSAN that is created here does not need to be a new VSAN. It is a new FICON VSAN. When a new
FICON VSAN is created, static (insistent) domain IDs, in-order delivery, and fabric binding must be
enabled so the FICON VSAN can operate. When you enable the FICON feature in Cisco MDS switches,
the following apply:
•
The IPL configuration file is automatically created (see the “FICON Configuration Files” section on
page 23-17 ).
• You cannot disable in-order delivery, fabric binding, or static (insistent) domain ID configurations.
If you specify an existing VSAN with operational traffic to be used for the FICON VSAN, the traffic
will be disrupted. In this case, a warning message is displayed before you create the FICON VSAN.
To create a FICON VSAN, follow these steps:
Step 1 From Device Manager, choose FICON > VSANs . You see the FICON VSANs/Files configuration dialog
box.
Step 2
Ensure that the VSANs tab is enabled.
Step 3 Click Create . You see the Create FICON VSANs dialog box.
Step 4
Enter the VSAN ID.
Step 5 Enter the Domain ID.
Step 6
Click Create to create the new VSAN, or click Close to close the dialog box without creating the VSAN.
Deleting FICON VSANs (Disabling FICON)
To delete a FICON VSAN, follow these steps:
Step 1
From Device Manager, choose FICON > VSANs . You see the FICON VSAN configuration dialog box.
Step 2 Ensure that the VSANs tab is enabled.
Step 3
Click anywhere in the row for the VSAN you want to delete.
Step 4 Click Delete to delete the VSAN.
Note Deleting the VSAN will also delete the associated FICON configuration file, and the file cannot
be recovered.