Cisco DS-C9216I-K9, Руководство по настройке

Страница: 215 / 436

18-19
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
OL-7753-01
Chapter 18 Configuring Switch Security
About SNMP Security
Editing Common Role Rules (Device Manager Only)
To edit the rules for a common role, perform the following steps:
Step 1 From the Device Manager, choose Security > Common Roles .
The Common Roles dialog box displays.
Step 2 Click once on the common role for which you want to edit the rules.
Step 3
Click Rules to view the rules for the role.
The Rules dialog may take a few minutes to display.
Step 4
Edit the rules you want to enable or disable for the common role.
Step 5 Click Apply to apply the new rules and close the Rules dialog, or click Close to close the Rules dialog
without applying the rules.
Step 6
Click Apply to create the common role, or click Close to close the Common Role dialog without creating
the common role.
Deleting Common Roles
To delete a common role, perform the following steps:
Step 1
From the Device Manager, choose Security > Common Roles . The Common Roles dialog box displays.
From Fabric Manager, choose Security > SNMP from the Physical pane menu tree, and click the Roles
tab in the Information pane.
Step 2
Click once to select the common role you want to delete.
Step 3 Click Delete to delete the common role.
Assigning Users to Roles
Once the user and the role are created, the administrator should configure an entry in the
vacmSecurityToGroupTable to add the configured user to a configured role.
• To assign users to roles through SNMP, refer to RFC2575.
•
To assign users to roles through the CLI, refer to the procedure specified in the Cisco MDS 9000
Family Command Reference .