Cisco DS-C9216I-K9, Руководство по настройке

Страница: 300 / 436

24-12
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
OL-7753-01
Chapter 24 Configuring IP Storage
Configuring FCIP
Step 4
Click the Tunnels tab if it is not already selected. The FCIP Tunnels dialog box lists the remote IP
address of the interface together with optional attributes.
Step 5 Click the Create button. You see the Create FCIP Tunnels dialog box.
Step 6
Enter the entity ID in the ID field.
Step 7 Enter a remote IP address as the endpoint to which you want to link.
Step 8
Enter all the optional information, if desired.
Step 9 Click Create to add this tunnel to the table. Click Close to close the Create FCIP Tunnels dialog box
without adding the tunnel.
Verifying Interfaces
To verify the interfaces, follow these steps:
Step 1
Be sure you are connected to a switch that contains an IPS module.
Step 2
Open Device Manager.
Step 3
Choose Interface > FCIP .
Step 4 Click the Interfaces tab (if it is not already selected) to see the FCIP Interfaces dialog box.
Verifying Extended Link Protocols (ELP)
To verify the extended link protocol, follow these steps:
Step 1 Be sure you are connected to a switch that contains an IPS module.
Step 2
Open Device Manager.
Step 3 Choose IP > FCIP .
Step 4
Click the ELP tab (if it is not already selected) to see the FCIP ELP dialogist.
Checking Trunk Status
To check the trunk status, follow these steps:
Step 1
Be sure you are connected to a switch that contains an IPS module.
Step 2
Open Device Manager.
Step 3
Choose IP > FCIP .
Step 4
Click the Trunk Status tab (if it is not already selected) to see the FCIP Trunk Status dialog box.