Cisco DS-C9216I-K9, Руководство по настройке

Страница: 278 / 436

23-16
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
OL-7753-01
Chapter 23 Configuring FICON
Entering FICON Port Configuration Information
Prohibiting Ports
To prevent implemented ports (see the “Implemented and Unimplemented Port Addresses” section on
page 23-9 ) from talking to each other, you can configure two or more ports to be in a prohibited state. If
you prohibit ports, the specified ports are prevented from communicating with each other.
Note Unimplemented ports are always prohibited.
Prohibit configurations are always symmetrically applied—if you prohibit Port 0 from talking to Port
15, Port 15 is automatically prohibited from talking to Port 0.
Note
If an interface is already configured in E or TE mode and you try to prohibit that port, your prohibit
configuration is rejected. Similarly, if a port is not up and you prohibit that port, the port is not allowed
to come up in E mode nor in TE mode.
Entering FICON Port Configuration Information
Note
To view the latest FICON information, you must click the Refresh button. See the “FICON Information
Refresh Note” section on page 23-15 for more information.
To display FICON Port Configuration information, follow these steps:
Step 1
From Device Manager, choose FICON > VSANs . You see the FICON VSAN configuration dialog box.
Step 2
Ensure that the VSANs tab is enabled.
Step 3
Click anywhere in the row for the VSAN for which you want to configure port information.
Step 4
Click Port Configuration to display the Port Configuration dialog box.
Step 5
Enter the port configuration information. Click Apply to save the configuration information, or click
Cancel to close the dialog box without saving the changes.