62-11389
7
−
35
Alarm
NO.
Steps
Alarm/Cause
Corrective Action
41
ENGINE STALLED - Continued
7
Check Engine Speed Sensor (ENSSN)
Inspect harness & control box
connector pins & terminals. (See
wiring schematic Section 10.)
No physical damage to harness.
No damage, moisture, or corrosion in connectors.
8
Check Electrical System Amperage
a. Check the configuration setting for
Diesel Max Gen Amps.
Must be set for 22 - 25 Amps
b. Check the configuration setting for
Diesel Offset Max Amps.
Must be set for 4 Amps
c. With the unit operating, check all 3
high voltage circuits for amperage.
Must be no more than 26 Amps.
9
Check engine air–intake system
a. Check air cleaner indicator.
Flag must not be visible.
b. Inspect air intake system.
Hoses & tubes in good condition.
No kinks or restrictions.
10
Check engine exhaust system
Inspect the exhaust system.
Must be clear and unobstructed.
11
Check engine
a. Check Injection pump timing.
Timing must be correct.
b. Check engine valve adjustment.
Rocker arm clearance must be correct.
c. Check engine compression.
Compression must be above 400 psig (27.2 bar.)
12
Check refrigeration system
Check discharge & suction pressures. Must be within normal operating range for conditions.
