Brother PS-300B Скачать руководство пользователя страница 99

Страница: 99 / 164

99/164

Complete the

Input Outline (Stitch, Feed)

dialog box to specify the points creating

the desired shape of data.

In the design area, click to specify the start point of the data. Then press any of the

numeric keys on the keyboard.

The Input Point dialog box appears.

Input values in the

Input Point

dialog box to specify the next point.

3. After specifying the last point, right-click once to finish the data.

The start point marker (“S”) and end point marker (“E”) for the data appear.

NOTE: Stitches that exceed the maximum stitch length or less than the minimum stitch length are

shown in red. You should change such stitches in allowable length of pitch, or create
stitches again.

As default, feed data will not make needle drop, and basting data will

make needle drop. If you want to change it, select a point with the

Select Point

tool, click

the

Code

icon

, then add/delete the Trim code on the point in the

Code Setting

dialog

box that appears.

4. Repeat steps 1 to 3 to add more data.

The end point of the previous data and the start point of the current one are connected with a feed

or a stitch that is specified in Property on the View drop-down menu.

NOTE: To create another data linked with the current data, click

Continue

on the

Shape

drop-

down menu or click the Continue icon

in the toolbar before finishing the current data.

3-2-4. Drawing manual stitch data by tracing an image (Shape-Trace,

)

The

Trace

command allows you to draw manual stitch data with the trace pitch specified in

Option

on the

Tools

drop-down menu.

1. Import an image to the design area.

For importing an image, refer to “

3-8. Image.

”

2. Do one of the following:

On the

Shape

drop-down menu, click

Trace

Click the Trace icon

in the toolbar.

3. In the design area, click to specify the start point of the image you will trace.

4. Move the pointer in the design area to trace the image.

Manual stitches are created with the specified trace pitch.

Содержание PS-300B





































































































































































Результаты поиска

Содержание PS-300B

Отзывы:

Похожие инструкции для PS-300B

Бренды по названию

Популярные бренды

Brother PS-300B, Инструкция по эксплуатации

Результаты поиска

Содержание PS-300B

Отзывы:

Похожие инструкции для PS-300B

Бренды по названию

Популярные бренды