Brother PS-300B Скачать руководство пользователя страница 100

Страница: 100 / 164

100/164

5. Right-click once to finish the tracing.

The start point marker (“S”) and end point marker (“E”) for the data appear.

NOTE: If you want to make a needle -drop point with a pitch other than specified, while holding the

keyboard’s

Shift

key, click the left mouse button at the desired point. To delete the last

inputted point, press the keyboard’s

Backspace

Space

key.

NOTE: To scroll the screen during tracing, do one of the following:

Press the keyboard’s arrow keys to scroll the screen up and down or left to right.

3-2-5. Adding and modifying a preset pattern (Shape-Pattern, )

You can add any of the preset patterns in the current design, and modify it by specifying its
length, width, number of stitches, and so on.

1. Do one of the following:

On the

Shape

drop-down menu, click

Pattern

Click the Pattern icon

in the toolbar.

The Pattern Select dialog box appears.

2. Select the pattern that you want to add to the current design, and then click the

button.

The Pattern Wizard dialog box for the selected pattern, like the one shown below, appears.

3. Adjust the parameters for the pattern as desired, and then click the

button.

A frame for the patte rn appears, and it can be moved with the mouse.

4. Click on the position where you want to paste the pattern.

The pattern is pasted on the design area.

NOTE: Refer to the instruction manual for the machine model you specified for the parameter

settings needed. (A machine model can be specified in

Machine Model Setting

on the

Tools

drop-down menu.)

Follow the instructions below to place the imported pattern correctly:

1. When a sewing area of a specified machine model is set in the design area:

While holding down the keyboard’s

Shift

key, click the left mouse button. The

center of the pattern aligns with the center of the sewing area.

While holding down the keyboard’s

Ctrl

key, click the left mouse button. The

center of the pattern aligns with the original point of the specified machine model.

Содержание PS-300B





































































































































































Результаты поиска

Содержание PS-300B

Отзывы:

Похожие инструкции для PS-300B

Бренды по названию

Популярные бренды

Brother PS-300B, Инструкция по эксплуатации

Результаты поиска

Содержание PS-300B

Отзывы:

Похожие инструкции для PS-300B

Бренды по названию

Популярные бренды