Brother PS-300B, Инструкция по эксплуатации

Страница: 136 / 164

136/164
3. In the Maintain group box, select whether to keep the number of stitches ( Stitch
Number ) or the pitch ( Pitch ) of the original data.
Item Explanation
Stitch Number Select this to keep the number of stitches. (The pitch will be changed.)
Pitch Select this to keep the pitch. (Stitch generation will be done again.)
NOTE: If you resize a shape of manual stitch or manual feed, the stitch number will not change
even when you select Pitch .
4. In the Resize by group box, select whether to resize the design eleme nts to a specific
dimension ( Size ) or to a percentage of the original size ( Percentage ).
5 Do one of the following:
If Size is selected, type the desired width in the Width input box and the desired
height in the Height input box. To maintain the design elements’ current height-to-
width proportion, check the Maintain Aspect Ratio check box.
If Percentage is selected, select Whole or Width/Height , then select the desired
percentage.
Item Explanation
Whole
Select this to resize both the width and height of the design elements, and
select the desired percentage from the drop-down list, or input the desired
percentage directly.
Width
Height Select this to resize the width and height of the design elements separately,
and select the desired percentage for each from the drop-down lists, or input
the desired percentage directly.