Brother PS-300B, Инструкция по эксплуатации

Страница: 131 / 164

131/164
The selected point changes to a black circle.
NOTE: The Add command is available only if a point that is not at the end of a design element is
selected.
2. Do one of the following:
On the Modify drop-down menu, click Point . On the Point sub- menu, click Add .
Right-click to display the context menu, and then click Add .
A new point is added in the center position between the specified and next points.
NOTE: If you try to add a point on an arc, two other points are automatically added to both sides
of the specified point to maintain the shape of the arc.
You cannot add a point on a circle or an ellipse.
To separate a design element at a point (Modify-Point-Split, ):
With the Split command, you can split a design element at individual points, allowing it to be
split or edited. This operation changes an open outline to two open outlines, and a closed
outline to an open outline.
1. Using the Select Point tool or Select Punch Point tool , select the point where you
want to split the design element.
The selected point changes to a black circle .
NOTE: The Split command is available only if a point that is not at the end of a design element is
selected.
2. Do one of the following:
On the Modify drop-down menu, click Point . On the Point sub- menu, click Split .